We Can provide You with Support Towers for Golf Netting
Golf Driving Range Net Support Towers to suit your need
A range of freestanding support towers for driving range net or to prevent balls to escape into adjacent neighbourhood properties a series of free standing towers available, ranging from small 12 to 187m Towers we manufacture are for our golf range are predominately 3 legged, lattice.
The towers can be factory painted in any RAL colour of your choice. See further data sheets for the individual family of towers.
For netting supply, we collaborate with companies like HUCK or HI-NETS etc. This is important to establish the structural design level needed to support the net for environmental conditions such as basic wind speed, elevation factor , ice conditions of the area of deployment.
All towers are fitted with pulley system for maintenance without the need for tower climb.
NOTE: If you want to make some extra money earner, contact any mobile operator or area wide WiFi supplier and offer space on your tower...as we are also supplier of communication towers for the mobile phone industry, we are more the happy put you in contact with our mobile operator clients.
HUCK, HI-NETS, etc can offer you offer 3 different weights of knot-less golf nets:
1.8mm x 25mm mesh golf net - this is the golf net to be used at most golf courses, it is lightweight, very strong and available in Dark Green or Black. it is ideally suited to large nets down the sides of golf ranges.
2.3mm x 25mm mesh golf net - this net is used as a medium distance protection golf net, If the driving range net starts right by the players then this is the golf net we recommend.
2.3mm x 20mm mesh golf net - It's a high impact golf netting suitable to hit straight into so can be used for any hard wearing areas of driving ranges.
All golf range nets can be supplied with an anti-vermin skirt on the base to help prevent animals eating the bottom of the range nets and to protect from machinery damage.
For many years we have also gained massive experience in structural calculation of towers for demanding environments, such as extremely low temperatures, strong winds, ice thickness and dynamically impacted structures subject to seismic activity.
Most self-supporting communication towers are assembled on the ground and lifted into place in one action using a mobile crane which is a unique feature, saving cost of crane hire. A second, smaller crane/fork-lift or tele-handler, is usually used to off-load the mast from the delivery lorry and to manoeuvre the sections and tower parts in place during assembly. Guy-wire masts can be erected a section at a time with the help of a crane or by using a ‘jib stick’ to hoist the sections into place by aid of a ground based winch. And why not use one of our recommended novel winch systems by LIMPET. Direct mast to LIMPET mechanical interface is available from LIMPET.
Unique extensive experience of communication towers design and manufacturing
Confirmative design to Eurocode standard with national annex
Confirmative design to TIA standard on request
Deflection criteria as per client requirement, say 0.5% or 1% at full wind gust
High level of corrosion protection, well in excess of ISO 1461 requirement
Extensive foundation design and support, adhering to site conditions
Comprehensive manufacturing record for the produce Comprehensive production and administrative quality assurance program such as EN 3834-2, EN1090-1, EN1090-2 for welded structures to Execution class 4.
Overarching production management system guarantee delivery on time
Antenna headframe for single user, share site, microwave dishes etc